A starting point for landscape camera settings
Most landscape photos are made with a small set of settings that rarely change. If you fix those at home, you only have three things to think about when the light gets good: aperture, shutter speed and where to focus.
Set these once
| Setting | Value | Why |
|---|---|---|
| File format | RAW | Keeps all the highlight and shadow detail for editing |
| ISO | Base ISO (100 on most cameras) | Cleanest file and the widest dynamic range |
| Mode | Aperture priority or manual | You choose the depth of field, not the camera |
| White balance | Daylight | Consistent colour from frame to frame; adjust later in RAW |
| Drive | 2-second timer or remote | No shake from pressing the shutter on a tripod |
Change these on location
Aperture. Start at f/8. Most lenses are sharpest between f/5.6 and f/11. Go to f/11 or f/13 only when you need more depth of field, for example with a rock or flower close to the lens.
Shutter speed. On a tripod, let it fall where it needs to. Choose it on purpose only when something moves: about 1/2 second for streaks in waves, several seconds or more to smooth water, and 1/250 or faster to freeze grass in wind.
Focus. Focus roughly a third of the way into the scene, then zoom in on the screen and check both the foreground and the horizon. If both cannot be sharp at once, take two frames focused at different distances and blend them later.
Check the histogram, not the screen
The screen looks brighter in the dark and darker in sunlight. The histogram does not lie. Push the exposure as far to the right as you can without the highlights touching the edge, and bracket when the sky is much brighter than the land.
When the wind blows
Wind is the enemy of long exposures. Lower the tripod, keep the centre column down, take the strap off or hold it, and stand between the wind and the camera. If the frame is still soft, raise the ISO and shorten the exposure. A sharp photo at ISO 400 beats a blurred one at ISO 100.